DOC

The Lowara DOC pumps are submersible pumps for clean and dirty water without fibres, making them ideal for drainage, septic tanks, tank emptying and general lifting duties. A 1.1/4″ top outlet makes for simple connections to pipework while keeping the pumps compact and efficient.

The DOC 3 and DOC 7 are available in 110V and 230V with cable or magnetic float switch for automatic operation or without for manual usage, the DOC 7 is also available in three phase 400V without float switch.

DOMO

The Lowara DOMO pumps are submersible pumps for dirty water and sewage, and thanks to the vortex impeller, handle solids up to 50mm in diameter (35mm for the DOMO 7 and DOMO 7VX). The DOMO 7 and 7VX have a 1.1/2″ outlet, while the DOMO 10, 15 and 20 have 2″, the latter can also be turned into a flanged version with an optional accesory.

Available in single-phase 220-240V with motors 0.55 to 1.1kW and three-phase 220-240V and 380-415V with motors 0.55kW to 1.5kW, the DOMO gives great performance with low power usage.

Also available in the GRI version which includes a grinder system for even more options for your dirty water and sewage.

SCUBA

Desgined for clean water and wells, the Lowara SCUBA pumps are 5″ diameter multistage submersible pumps in hard wearing stainless steel, making them ideal for irrigation and moving water with solids less than 2.5mm from ponds, lakes, ditches or cisterns.

With a maximum flow rate of 12m³/h (200 litres per minute) and maximum head of 100 metres, while keeping motor power to 2.2kW maximum, the SCUBA offers great performance at efficient electric usage.

Available in single and three-phase verstions, the single-phase units come with built-in capacitor and thermal overload and with optional float switch for automatic operation.

e-NSC

Designed to meet the Commercial Building Services (BCS) requirements and with a highly efficient IE3 motor, the e-NSC series are a centrifugal pump with flanged suction and delivery ports from DN32 through to DN350, giving flow rates up to 500 litres per minute (800m³/h) and pressures up to 8 bar, depending on model.

Availble in a variety of configurations and with a number of seal options, the standard pump allows for temperatures of -25°C to +120°C, though versions on request allow for temperatures up to +140°C.

The e-NSC range can also be supplied with the Hydrovar®X inverter, making them even more efficient to run.

HM HMS HMZ SERIES

The Lowara HM, HMS, HMZ series are horizontal multistage centrifugal pumps with stainless steel pumps bodies, diffuser and seal housing . The HMS series also has a stainless steel impeller and is capable of dealing with liquid up to 110°C, 60°C for the HM and HMZ.

The pumps are ideal for both domestic and industrial applications with flow up to 7.2m³/h (2 litres per second) and head up to 60 metres. They can also be attached to an inverter for variable speed operation and are available with different mechanical seal and elastomer options.

CEA CA CEA(M) CA(M) SERIES

The Lowara CEA and CA series are centrifugal pumps in 304 stainless steel for domestic and industrial applications including, with the N version, swimming pools. Standard NBR elastomers allow for temperatures up to 85°C, but the optional FPM elastomers can handle liquids up to 110°C.

With a maximum flow rate of 31m³/h (320 litres per minute) and maximum head of up to 62 metres, the CEA and CA pumps are available in single-phase and three-phase, with power requirements from 0.37kW to 3kW. The pumps can also be made variable speed with inverters and have different elastomer and mechanical seal options.

CO SERIES

The Lowara COM / CO series are open impeller centrifugal pumps in 316 stainless steel suitable for pumping moderately agressive liquids containing suspended solids. Available in 2 models, the CO350 will pass solids up to 11mm, the CO500 will pass 20mm. Both will handle liquid temperatures up to 120°C.

With a maximum flow rate of 54m³/h (900 litres per minute) and maximum head of up to 24 metres, the CO pumps are available in single-phase and three-phase, with power requirements from 0.37kW to 3kW. The pumps can also be made variable speed with inverters and have different elastomer and mechanical seal options.

SHO SERIES

The Lowara SHO series are end suction, open and recess impeller centrifugal pumps in stainless steel, ideal for civil and industrial clean water applications. Available as the SHOE (close coupled version) and SHOD (rigid coupling with double mechanical seal), the SHO are capable of flow rates up to 56m³/h (2-pole version only, 4 pole version max 54m³/h) and head up to 50m (4 pole version 12m).

Available in single phase and three-phase, with power from 0.37kW to 11kW, the SHO series, with the appropriate mechanical seal and elastomers, media temperatures of -10°C to +120°C can be used.

The SHO series of pumps can also be supplied with the Hydrovar®X inverter, making them even more efficient to run.

e-SV SERIES

Available in 11 different variants with flow rates up to 125m³/h, the Lowara e-SV are a vertical multistage pump for pumping clean water. The e-SV is certified by WRAS, ACS and D.M. 174 for use with potable water.

The e-SV range can also be supplied with the Hydrovar®X inverter, making them even more efficient to run.

Self-Priming BG / BGM

The Lowara BGM (Single-Phase) and BG (Three-Phase) pumps are stainless steel, self-priming pumps capable of handling small gas bubbles. Useful for water distribution, pressure boosting, irrigation and rainwater harvesting, among others, the BG series’ small and lightweight design makes use easy, and it’s stainless steel construction makes it durable and long lasting.

The BG series has flow rates up from 50 litres per minute maximum on the BG3, up to 70 litres per minute maximum for the BG11. Maximum heads range from 36.9 metres for the BG3 up to 53.2m on the BG11 with the BG5, BG7 and BG9 offering flows and pressures in between.